Climax Metal C-150-S Shaft Collar, One Piece, Set Screw Style, Stainless Steel, 1-1/2" Bore, 2-1/4" OD, 3/4" Width, With 3/8-16 x 3/8 Set Screw

Climax Metal C-150-S Shaft Collar, One Piece, Set Screw Style, Stainless Steel, 1-1/2" Bore, 2-1/4" OD, 3/4" Width, With 3/8-16 x 3/8 Set Screw
by Climax Metal
(1)

New!: $25.05 $17.77 (as of 01/31/2013 23:45 PST)

Shaft Collars

This Climax Metal setscrew shaft collar is made of stainless steel 303. It is a setscrew-type shaft collar for applications supporting low axial loads and simple positioning. Setscrew collars have improved holding power when the shaft material is softer than the setscrew material. It is made of stainless steel 303 for greater resistance to corrosion than steel or aluminum. This collar comes with a socket setscrew for securing the collar onto the shaft. The operating temperatures for this collar range from -40 to 426 degrees C (-40 to 800 degrees F).This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Climax Metal Products Company (CLIMAX) manufactures shaft collars, rigid couplings, keyless locking devices, pulleys, keyless bushings, and bearings for the power transmission industry and industrial maintenance, repair, and operations (MRO) markets. The company, founded in 1946, and headquartered in Mentor, OH, meets International Organization for Standardization (ISO) 9001:2008 quality assurance standards.

• Rank: #11058 in BISS
• Brand: Climax Metal
• Number of items: 1

• Setscrew shaft collar for applications supporting low axial loads and simple positioning
• Effective on shafts made of softer material than the setscrew material
• Stainless steel 303 for greater corrosion resistance than steel or aluminum
• Includes a socket setscrew for securing the collar onto the shaft
• Operating temperatures range from -40 to 426 degrees C (-40 to 800 degrees F)

Climax Metal H1C-031 Shaft Collar, One Piece, Black Oxide Finish, Steel, 5/16" Bore, 13/16" OD, 1/4 Width, With 10-32 x 1/8 Clamp Screw

Climax Metal H1C-031 Shaft Collar, One Piece, Black Oxide Finish, Steel, 5/16" Bore, 13/16" OD, 1/4 Width, With 10-32 x 1/8 Clamp Screw
by Climax Metal



Shaft Collars

This Climax Metal one-piece clamping shaft collar has a recessed screw head and is made of black oxide steel. It is a one-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars. It is easier to remove and reposition than setscrew collars and is effective on both hard and soft shafts. This collar has a recessed screw head that provides an exterior profile free of major projections for increased safety. It is made of steel for weldability and rust resistance with a black oxide finish for a decorative appearance and resistance to white corrosion, chipping and flaking, and stick-slip of the screw during torqueing, improving the collar's grip on the shaft. Black oxide also provides mild corrosion resistance and improved lubricity. This collar comes with socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range from -17 to 148 degrees C (0 to 300 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Climax Metal Products Company (CLIMAX) manufactures shaft collars, rigid couplings, keyless locking devices, pulleys, keyless bushings, and bearings for the power transmission industry and industrial maintenance, repair, and operations (MRO) markets. The company, founded in 1946, and headquartered in Mentor, OH, meets International Organization for Standardization (ISO) 9001:2008 quality assurance standards.

• Rank: #4183 in BISS
• Brand: Climax Metal
• Number of items: 1

• One-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars
• Recessed screw head provides an exterior profile free of major projections for increased safety
• Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion
• Includes socket-head cap screws for securing the collar onto the shaft
• Operating temperatures range from -17 to 148 degrees C (0 to 300 degrees F)

Climax Metal C170E-037 Shaft Collar With Keyless Lock Assembly, Steel, 3/8" Bore, 0.63" OD, 1.181" Width

Climax Metal C170E-037 Shaft Collar With Keyless Lock Assembly, Steel, 3/8" Bore, 0.63" OD, 1.181" Width
by Climax Metal

New!: $67.60 $65.88 (as of 01/31/2013 01:45 PST)

Shaft Collars

This Climax Metal one-piece clamping shaft collar has a keyless locking assembly and is made of steel. It is a one-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars. It is easier to remove and reposition than setscrew collars and is effective on both hard and soft shafts. This collar has a keyless locking assembly for providing a zero-backlash connection that generates an interference fit on rotating shafts in environments subjected to vibratory, shock, or reversing loads. The assembly attaches to the shaft using multiple high-strength screws and opposing tapers instead of a keyed connection, which tends to deteriorate over time in harsh operating environments. It is made of steel for weldability and rust resistance. This collar comes with socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range from -17 to 148 degrees C (0 to 300 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Climax Metal Products Company (CLIMAX) manufactures shaft collars, rigid couplings, keyless locking devices, pulleys, keyless bushings, and bearings for the power transmission industry and industrial maintenance, repair, and operations (MRO) markets. The company, founded in 1946, and headquartered in Mentor, OH, meets International Organization for Standardization (ISO) 9001:2008 quality assurance standards.

• Rank: #66593 in BISS
• Brand: Climax Metal
• Number of items: 1

• One-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars
• Keyless locking assembly provides a zero-backlash connection to generate an interference fit on rotating shafts in extreme operating environments
• Steel for weldability and rust resistance
• Includes socket-head cap screws for securing the collar onto the shaft
• Operating temperatures range from -17 to 148 degrees C (0 to 300 degrees F)

Climax Metal CRC-050-S Shaft Collar, One Piece, Set Screw Style, 316 Stainless Steel, 1/2" Bore, 1" OD, 7/16" Width, With 1/4-20 x 1/4 Set Screw

Buy on the merchant's on-line searching and read reviews. If you're trying to search out Climax Metal CRC-050-S Shaft Collar, One Piece, Set Screw Style, 316 Stainless Steel, 1/2" Bore, 1" OD, 7/16" Width, With 1/4-20 x 1/4 Set Screw with the simplest value. This is the simplest deal for you. Where you may notice these item is by on-line shopping stores? Read the review on Climax Metal CRC-050-S Shaft Collar, One Piece, Set Screw Style, 316 Stainless Steel, 1/2" Bore, 1" OD, 7/16" Width, With 1/4-20 x 1/4 Set Screw Now, it's discount price. Thus do not lose it.


Climax Metal CRC-050-S Shaft Collar, One Piece, Set Screw Style, 316 Stainless Steel, 1/2" Bore, 1" OD, 7/16" Width, With 1/4-us.html x 1/4 Set Screw
by Climax Metal
(1)

New!: $11.99 $7.69 (as of 01/30/2013 15:08 PST)

Shaft Collars

This Climax Metal setscrew shaft collar has a corrosion-resistant design and is made of stainless steel 316. It is a setscrew-type shaft collar for applications supporting low axial loads and simple positioning. Setscrew collars have improved holding power when the shaft material is softer than the setscrew material. This collar has a corrosion-resistant design for applications involving harsh environments or frequent washdowns. It is made of stainless steel 316 for greater resistance to corrosion than steel or stainless steel 303. Stainless steel 316 is sometimes called "marine-grade stainless steel" due to its resistance to chloride corrosion. This material is suitable for wash-down environments common in industries such as pharmaceutical manufacturing and food processing. This collar comes with a socket setscrew for securing the collar onto the shaft. The operating temperatures for this collar range from -40 to 426 degrees C (-40 to 800 degrees F).This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Climax Metal Products Company (CLIMAX) manufactures shaft collars, rigid couplings, keyless locking devices, pulleys, keyless bushings, and bearings for the power transmission industry and industrial maintenance, repair, and operations (MRO) markets. The company, founded in 1946, and headquartered in Mentor, OH, meets International Organization for Standardization (ISO) 9001:2008 quality assurance standards.

• Rank: #49059 in BISS
• Brand: Climax Metal
• Number of items: 1

• Setscrew shaft collar for applications supporting low axial loads and simple positioning
• Corrosion-resistant design for applications involving harsh environments or frequent washdowns
• Stainless steel 316 for greater corrosion resistance than steel or stainless steel 303
• Includes a socket setscrew for securing the collar onto the shaft
• Operating temperatures range from -40 to 426 degrees C (-40 to 800 degrees F)

Ruland SP-14-F Two-Piece Clamping Shaft Collar, Black Oxide Steel, .875" Bore, 1 5/8" OD, 1/2" Width (Pack of 2)

Buy on the merchant's website shopping and scan reviews. If you are attempting to find Ruland SP-14-F Two-Piece Clamping Shaft Collar, Black Oxide Steel, .875" Bore, 1 5/8" OD, 1/2" Width (Pack of 2) with the simplest deal. This is the most effective deal for you. Where you'll realize these item is by online looking stores? Read the review on Ruland SP-14-F Two-Piece Clamping Shaft Collar, Black Oxide Steel, .875" Bore, 1 5/8" OD, 1/2" Width (Pack of 2) Now, it's the simplest deals. So do not lose it.


Ruland SP-14-F Two-Piece Clamping Shaft Collar, Black Oxide Steel, .875" Bore, 1 5/8" OD, 1/2" Width (Pack of 2)
by Ruland
(2)

New!: $14.08 (as of 01/30/2013 03:48 PST)

Shaft Collars

This Ruland two-piece clamping shaft collar is made of black oxide steel. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-piece design separates into two halves, allowing installation or repositioning anywhere on the shaft without disturbing existing components. It accommodates a greater variety of shaft diameters than setscrew collars and is effective on both hard and soft shafts. It is made of steel for weldability and rust resistance with a black oxide finish for a decorative appearance and resistance to white corrosion, chipping and flaking, and stick-slip of the screw during torqueing, improving the collar's grip on the shaft. Black oxide also provides mild corrosion resistance and improved lubricity. This collar comes with forged socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range from -40 to 176 degrees C (-40 to 350 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Ruland manufactures shaft collars, rigid couplings, and zero-backlash motion control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The company, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) standards.

• Rank: #184488 in BISS
• Brand: Ruland
• Number of items: 2

• Two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars
• Effective on both hard and soft shafts
• Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion
• Includes forged socket-head cap screws for securing the collar onto the shaft
• Operating temperatures range from -40 to 176 degrees C (-40 to 350 degrees F)

Climax Metal 1000SC Shaft Collar, Steel, Quick Release Style , One Piece , 1" Bore, 1.860" OD, 2.00" Minimum Length Through Bore

Buy on the merchant's website looking and scan reviews. If you're making an attempt to find Climax Metal 1000SC Shaft Collar, Steel, Quick Release Style , One Piece , 1" Bore, 1.860" OD, 2.00" Minimum Length Through Bore with special value. This is the most effective price for you. Where you could find these item is by online searching stores? Read the review on Climax Metal 1000SC Shaft Collar, Steel, Quick Release Style , One Piece , 1" Bore, 1.860" OD, 2.00" Minimum Length Through Bore Now, it's the simplest deals. So don't lose it.


Climax Metal 1000SC Shaft Collar, Steel, Quick Release Style , One Piece , 1" Bore, 1.860" OD, 2.00" Minimum Length Through Bore
by Small Parts
(1)

New!: $26.70 (as of 01/29/2013 09:58 PST)

Shaft Collars

Quick release Shaft Collar/Fasteners from Grip Fast can be moved, removed or adjusted in seconds. No need for tightening set screws or clamping devices. In fact, no tools are needed at all. Just slide the Fastener onto the shaft and it locks automatically in the opposite direction, holding tight where you want it secured. Release occurs with a simple squeeze action that allows the spring loaded housing to slide in either direction for removal or repositioning. The inner mechanism is comprised of three Chrome Alloy Grade 25 balls, a case hardened Steel retention ring with a tapering inner diameter, and one hard drawn spring.

• Rank: #88534 in BISS
• Brand: Small Parts
• Number of items: 1

Ruland SC-6-SS Set Screw Shaft Collar, Stainless Steel, .375" Bore, 3/4" OD, 3/8" Width (Pack of 4)

Buy on the merchant's online searching and browse reviews. If you're attempting to find Ruland SC-6-SS Set Screw Shaft Collar, Stainless Steel, .375" Bore, 3/4" OD, 3/8" Width (Pack of 4) with the simplest price. This is the simplest deals for you. Where you'll find these item is by on-line shopping stores? Read the review on Ruland SC-6-SS Set Screw Shaft Collar, Stainless Steel, .375" Bore, 3/4" OD, 3/8" Width (Pack of 4) Now, it's the simplest value. So don't lose it.


Ruland SC-6-SS Set Screw Shaft Collar, Stainless Steel, .375" Bore, 3/4" OD, 3/8" Width (Pack of 4)
by Ruland

New!: $12.89 (as of 01/28/2013 23:43 PST)

Shaft Collars

This Ruland setscrew shaft collar is made of stainless steel 303. It is a setscrew-type shaft collar for applications supporting low axial loads and simple positioning. Setscrew collars have improved holding power when the shaft material is softer than the setscrew material. It is made of stainless steel 303 for greater resistance to corrosion than steel or aluminum. This collar comes with a forged setscrew for securing the collar onto the shaft. The operating temperatures for this collar range from -40 to 176 degrees C (-40 to 350 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Ruland manufactures shaft collars, rigid couplings, and zero-backlash motion control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The company, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) standards.

• Rank: #49143 in BISS
• Brand: Ruland
• Number of items: 4

• Setscrew shaft collar for applications supporting low axial loads and simple positioning
• Effective on shafts made of softer material than the setscrew material
• Stainless steel 303 for greater corrosion resistance than steel or aluminum
• Includes a forged setscrew for securing the collar onto the shaft
• Operating temperatures range from -40 to 176 degrees C (-40 to 350 degrees F)

Climax Metal H1C-037 Shaft Collar, One Piece, Black Oxide Finish, Steel, 3/8" Bore, 1-1/16" OD, 5/16 Width, With 1/4-20 x 3/16 Clamp Screw

Buy on the merchant's website looking and scan reviews. If you're attempting to find Climax Metal H1C-037 Shaft Collar, One Piece, Black Oxide Finish, Steel, 3/8" Bore, 1-1/16" OD, 5/16 Width, With 1/4-20 x 3/16 Clamp Screw with discount value. This is the simplest price for you. Where you'll realize these item is by online searching stores? Read the review on Climax Metal H1C-037 Shaft Collar, One Piece, Black Oxide Finish, Steel, 3/8" Bore, 1-1/16" OD, 5/16 Width, With 1/4-20 x 3/16 Clamp Screw Now, it's discount deals. So do not lose it.


Climax Metal H1C-037 Shaft Collar, One Piece, Black Oxide Finish, Steel, 3/8" Bore, 1-1/16" OD, 5/16 Width, With 1/4-us.html x 3/16 Clamp Screw
by Climax Metal



Shaft Collars

This Climax Metal one-piece clamping shaft collar has a recessed screw head and is made of black oxide steel. It is a one-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars. It is easier to remove and reposition than setscrew collars and is effective on both hard and soft shafts. This collar has a recessed screw head that provides an exterior profile free of major projections for increased safety. It is made of steel for weldability and rust resistance with a black oxide finish for a decorative appearance and resistance to white corrosion, chipping and flaking, and stick-slip of the screw during torqueing, improving the collar's grip on the shaft. Black oxide also provides mild corrosion resistance and improved lubricity. This collar comes with socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range from -17 to 148 degrees C (0 to 300 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Climax Metal Products Company (CLIMAX) manufactures shaft collars, rigid couplings, keyless locking devices, pulleys, keyless bushings, and bearings for the power transmission industry and industrial maintenance, repair, and operations (MRO) markets. The company, founded in 1946, and headquartered in Mentor, OH, meets International Organization for Standardization (ISO) 9001:2008 quality assurance standards.

• Rank: #4610 in BISS
• Brand: Climax Metal
• Number of items: 1

• One-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars
• Recessed screw head provides an exterior profile free of major projections for increased safety
• Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion
• Includes socket-head cap screws for securing the collar onto the shaft
• Operating temperatures range from -17 to 148 degrees C (0 to 300 degrees F)

Ruland SC-3-A Set Screw Shaft Collar, Aluminum, .188" Bore, 7/16" OD, 1/4" Width (Pack of 4) (Pack of 4)

Buy on the merchant's on-line looking and read reviews. If you are trying to search out Ruland SC-3-A Set Screw Shaft Collar, Aluminum, .188" Bore, 7/16" OD, 1/4" Width (Pack of 4) (Pack of 4) with the simplest deal. This is the most effective price for you. Where you may realize these item is by online looking stores? Read the review on Ruland SC-3-A Set Screw Shaft Collar, Aluminum, .188" Bore, 7/16" OD, 1/4" Width (Pack of 4) (Pack of 4) Now, it's the simplest value. So don't lose it.


Ruland SC-3-A Set Screw Shaft Collar, Aluminum, .188" Bore, 7/16" OD, 1/4" Width (Pack of 4) (Pack of 4)
by Ruland

New!: $5.93 (as of 01/18/2013 04:00 PST)

Shaft Collars

This Ruland setscrew shaft collar is made of aluminum. It is a setscrew-type shaft collar for applications supporting low axial loads and simple positioning. Setscrew collars have improved holding power when the shaft material is softer than the setscrew material. It is made of aluminum for resistance to corrosion and tarnishing and is lightweight for use in applications where material weight is a consideration. This collar comes with a forged setscrew for securing the collar onto the shaft. The operating temperatures for this collar range from -40 to 107 degrees C (-40 to 225 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Ruland manufactures shaft collars, rigid couplings, and zero-backlash motion control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The company, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) standards.

• Rank: #11206 in BISS
• Brand: Ruland
• Number of items: 4

• Setscrew shaft collar for applications supporting low axial loads and simple positioning
• Effective on shafts made of softer material than the setscrew material
• Aluminum for resisting corrosion and tarnishing
• Includes a forged setscrew for securing the collar onto the shaft
• Operating temperatures range from -40 to 107 degrees C (-40 to 225 degrees F)

Climax Metal MC-03-S T303 Set Screw Collar, Stainless Steel, Metric, 3mm Bore Size, 7mm OD, With M2 x 2.5 Set Screw

Buy on the merchant's online shopping and scan reviews. If you are trying to search out Climax Metal MC-03-S T303 Set Screw Collar, Stainless Steel, Metric, 3mm Bore Size, 7mm OD, With M2 x 2.5 Set Screw with the simplest deals. This is the simplest deals for you. Where you may notice these item is by online searching stores? Read the review on Climax Metal MC-03-S T303 Set Screw Collar, Stainless Steel, Metric, 3mm Bore Size, 7mm OD, With M2 x 2.5 Set Screw Now, it's discount worth. Therefore don't lose it.


Climax Metal MC-03-S T303 Set Screw Collar, Stainless Steel, Metric, 3mm Bore Size, 7mm OD, With M2 x 2.5 Set Screw
by Climax Metal



Shaft Collars

This Climax Metal setscrew shaft collar is made of stainless steel 303. It is a setscrew-type shaft collar for applications supporting low axial loads and simple positioning. Setscrew collars have improved holding power when the shaft material is softer than the setscrew material. It is made of stainless steel 303 for greater resistance to corrosion than steel or aluminum. This collar comes with a socket setscrew for securing the collar onto the shaft. The operating temperatures for this collar range from -40 to 426 degrees C (-40 to 800 degrees F).This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Climax Metal Products Company (CLIMAX) manufactures shaft collars, rigid couplings, keyless locking devices, pulleys, keyless bushings, and bearings for the power transmission industry and industrial maintenance, repair, and operations (MRO) markets. The company, founded in 1946, and headquartered in Mentor, OH, meets International Organization for Standardization (ISO) 9001:2008 quality assurance standards.

• Rank: #6452 in BISS
• Brand: Climax Metal
• Number of items: 1

• Setscrew shaft collar for applications supporting low axial loads and simple positioning
• Effective on shafts made of softer material than the setscrew material
• Stainless steel 303 for greater corrosion resistance than steel or aluminum
• Includes a socket setscrew for securing the collar onto the shaft
• Operating temperatures range from -40 to 426 degrees C (-40 to 800 degrees F)

Boston Gear 2SC75 Clamping Shaft Collar, Two-Piece, Steel, 0.750" Bore, 1.750" OD, 0.250" Width

Buy on the merchant's on-line shopping and read reviews. If you're attempting to search out Boston Gear 2SC75 Clamping Shaft Collar, Two-Piece, Steel, 0.750" Bore, 1.750" OD, 0.250" Width with discount deal. This is the most effective price for you. Where you could notice these item is by online shopping stores? Read the review on Boston Gear 2SC75 Clamping Shaft Collar, Two-Piece, Steel, 0.750" Bore, 1.750" OD, 0.250" Width Now, it's the simplest deal. Thus do not lose it.


Boston Gear 2SC75 Clamping Shaft Collar, Two-Piece, Steel, 0.750" Bore, 1.750" OD, 0.250" Width
by Boston Gear

New!: $21.96 (as of 01/17/2013 06:41 PST)

Shaft Collars

This Boston Gear two-piece clamping shaft collar is made of black oxide steel. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-piece design separates into two halves, allowing installation or repositioning anywhere on the shaft without disturbing existing components. It accommodates a greater variety of shaft diameters than setscrew collars and is effective on both hard and soft shafts. It is made of steel for weldability and rust resistance with a black oxide finish for a decorative appearance and resistance to white corrosion, chipping and flaking, and stick-slip of the screw during torqueing, improving the collar's grip on the shaft. Black oxide also provides mild corrosion resistance and improved lubricity. This collar comes with socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range from -35 to 176 degrees C (-32 to 350 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Boston Gear manufactures power transmission products and components including enclosed and open gear drives, worm gear speed reducers, spur gears and racks, electric drives, plain sleeve and ball bearings, washers, and rod ends. The company, founded in 1877, and headquartered in Charlotte, NC, meets International Organization for Standardization (ISO) 9001:2008 quality assurance standards and is a member of the Power Transmission Distributors Association.

• Rank: #8088 in BISS
• Brand: Boston Gear
• Number of items: 1

• Two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars
• Effective on both hard and soft shafts
• Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion
• Includes socket-head cap screws for securing the collar onto the shaft
• Operating temperatures range from -35 to 176 degrees C (-32 to 350 degrees F)

Climax Metal D2C-031-S Two-Piece Clamping Collar, Double Wide, Stainless Steel, 5/16" Bore, 11/16" OD, 5/8" Width

Buy on the merchant's website looking and browse reviews. If you are trying to seek out Climax Metal D2C-031-S Two-Piece Clamping Collar, Double Wide, Stainless Steel, 5/16" Bore, 11/16" OD, 5/8" Width with special deals. This is the simplest deals for you. Where you'll realize these item is by online looking stores? Read the review on Climax Metal D2C-031-S Two-Piece Clamping Collar, Double Wide, Stainless Steel, 5/16" Bore, 11/16" OD, 5/8" Width Now, it's discount deal. Thus do not lose it.


Climax Metal D2C-031-S Two-Piece Clamping Collar, Double Wide, Stainless Steel, 5/16" Bore, 11/16" OD, 5/8" Width
by Climax Metal

New!: $36.62 $23.45 (as of 01/16/2013 19:43 PST)

Shaft Collars

This Climax Metal two-piece clamping shaft collar has a double-wide design and is made of stainless steel 303. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-piece design separates into two halves, allowing installation or repositioning anywhere on the shaft without disturbing existing components. It accommodates a greater variety of shaft diameters than setscrew collars and is effective on both hard and soft shafts. This collar has a double-wide design to support high axial loads and to fit into areas that are too constrained for full-sized rigid couplings. It is made of stainless steel 303 for greater resistance to corrosion than steel or aluminum. This collar comes with socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range from -40 to 426 degrees C (-40 to 800 degrees F).This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Climax Metal Products Company (CLIMAX) manufactures shaft collars, rigid couplings, keyless locking devices, pulleys, keyless bushings, and bearings for the power transmission industry and industrial maintenance, repair, and operations (MRO) markets. The company, founded in 1946, and headquartered in Mentor, OH, meets International Organization for Standardization (ISO) 9001:2008 quality assurance standards.

• Rank: #9129 in BISS
• Size: With 4-40 x 3/8 Set Screw
• Brand: Climax Metal
• Number of items: 1

• Two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars
• Double-wide design for high axial loads and for fitting into spaces too constrained for full-sized rigid couplings
• Stainless steel 303 for greater corrosion resistance than steel or aluminum
• Includes socket-head cap screws for securing the collar onto the shaft
• Operating temperatures range from -40 to 426 degrees C (-40 to 800 degrees F)

Ruland SC-8-F Set Screw Shaft Collar, Black Oxide Steel, .500" Bore, 1" OD, 7/16" Width (Pack of 4)

Buy on the merchant's on-line looking and read reviews. If you're making an attempt to find Ruland SC-8-F Set Screw Shaft Collar, Black Oxide Steel, .500" Bore, 1" OD, 7/16" Width (Pack of 4) with the simplest price. This is the simplest price for you. Where you may notice these item is by on-line shopping stores? Read the review on Ruland SC-8-F Set Screw Shaft Collar, Black Oxide Steel, .500" Bore, 1" OD, 7/16" Width (Pack of 4) Now, it's the simplest worth. Thus don't lose it.


Ruland SC-8-F Set Screw Shaft Collar, Black Oxide Steel, .500" Bore, 1" OD, 7/16" Width (Pack of 4)
by Ruland

New!: $5.45 (as of 01/16/2013 09:59 PST)

Shaft Collars

This Ruland setscrew shaft collar is made of black oxide steel. It is a setscrew-type shaft collar for applications supporting low axial loads and simple positioning. Setscrew collars have improved holding power when the shaft material is softer than the setscrew material. It is made of steel for weldability and rust resistance with a black oxide finish for a decorative appearance and resistance to white corrosion, chipping and flaking, and stick-slip of the screw during torqueing, improving the collar's grip on the shaft. Black oxide also provides mild corrosion resistance and improved lubricity. This collar comes with a forged setscrew for securing the collar onto the shaft. The operating temperatures for this collar range from -40 to 176 degrees C (-40 to 350 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Ruland manufactures shaft collars, rigid couplings, and zero-backlash motion control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The company, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) standards.

• Rank: #1407 in BISS
• Brand: Ruland
• Number of items: 4

• Setscrew shaft collar for applications supporting low axial loads and simple positioning
• Effective on shafts made of softer material than the setscrew material
• Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion
• Includes a forged setscrew for securing the collar onto the shaft
• Operating temperatures range from -40 to 176 degrees C (-40 to 350 degrees F)

Climax Metal M1C-20-S Shaft Collar, One Piece, Stainless Steel, Metric, 20mm Bore, 1-5/8" OD, 15mm Width, With M6 x 16 Clamp Screw

Buy on the merchant's website looking and scan reviews. If you're making an attempt to find Climax Metal M1C-20-S Shaft Collar, One Piece, Stainless Steel, Metric, 20mm Bore, 1-5/8" OD, 15mm Width, With M6 x 16 Clamp Screw with discount price. This is the most effective price for you. Where you'll notice these item is by online shopping stores? Read the review on Climax Metal M1C-20-S Shaft Collar, One Piece, Stainless Steel, Metric, 20mm Bore, 1-5/8" OD, 15mm Width, With M6 x 16 Clamp Screw Now, it's special value. Therefore do not lose it.


Climax Metal M1C-us.html-S Shaft Collar, One Piece, Stainless Steel, Metric, 20mm Bore, 1-5/8" OD, 15mm Width, With M6 x 16 Clamp Screw
by Climax Metal
(1)

New!: $18.21 $13.49 (as of 01/16/2013 00:14 PST)

Shaft Collars

This Climax Metal one-piece clamping shaft collar is made of stainless steel 303. It is a one-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars. It is easier to remove and reposition than setscrew collars and is effective on both hard and soft shafts. It is made of stainless steel 303 for greater resistance to corrosion than steel or aluminum. This collar comes with socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range from -40 to 426 degrees C (-40 to 800 degrees F).This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Climax Metal Products Company (CLIMAX) manufactures shaft collars, rigid couplings, keyless locking devices, pulleys, keyless bushings, and bearings for the power transmission industry and industrial maintenance, repair, and operations (MRO) markets. The company, founded in 1946, and headquartered in Mentor, OH, meets International Organization for Standardization (ISO) 9001:2008 quality assurance standards.

• Rank: #9966 in BISS
• Brand: Climax Metal
• Number of items: 1

• One-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars
• Effective on both hard and soft shafts
• Stainless steel 303 for greater corrosion resistance than steel or aluminum
• Includes socket-head cap screws for securing the collar onto the shaft
• Operating temperatures range from -40 to 426 degrees C (-40 to 800 degrees F)

Climax Metal CRC-009-S Shaft Collar, One Piece, Set Screw Style, 316 Stainless Steel, 3/32" Bore, 3/8" OD, 3/16" Width, With 6-32 x 1/8 Set Screw

Buy on the merchant's on-line searching and scan reviews. If you're making an attempt to seek out Climax Metal CRC-009-S Shaft Collar, One Piece, Set Screw Style, 316 Stainless Steel, 3/32" Bore, 3/8" OD, 3/16" Width, With 6-32 x 1/8 Set Screw with special deals. This is the most effective price for you. Where you could find these item is by on-line searching stores? Read the review on Climax Metal CRC-009-S Shaft Collar, One Piece, Set Screw Style, 316 Stainless Steel, 3/32" Bore, 3/8" OD, 3/16" Width, With 6-32 x 1/8 Set Screw Now, it's the simplest price. Thus don't lose it.


Climax Metal CRC-009-S Shaft Collar, One Piece, Set Screw Style, 316 Stainless Steel, 3/32" Bore, 3/8" OD, 3/16" Width, With 6-32 x 1/8 Set Screw
by Climax Metal
(1)

New!: $11.89 $1.04 (as of 01/15/2013 13:55 PST)

Shaft Collars

This Climax Metal setscrew shaft collar has a corrosion-resistant design and is made of stainless steel 316. It is a setscrew-type shaft collar for applications supporting low axial loads and simple positioning. Setscrew collars have improved holding power when the shaft material is softer than the setscrew material. This collar has a corrosion-resistant design for applications involving harsh environments or frequent washdowns. It is made of stainless steel 316 for greater resistance to corrosion than steel or stainless steel 303. Stainless steel 316 is sometimes called "marine-grade stainless steel" due to its resistance to chloride corrosion. This material is suitable for wash-down environments common in industries such as pharmaceutical manufacturing and food processing. This collar comes with a socket setscrew for securing the collar onto the shaft. The operating temperatures for this collar range from -40 to 426 degrees C (-40 to 800 degrees F).This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Climax Metal Products Company (CLIMAX) manufactures shaft collars, rigid couplings, keyless locking devices, pulleys, keyless bushings, and bearings for the power transmission industry and industrial maintenance, repair, and operations (MRO) markets. The company, founded in 1946, and headquartered in Mentor, OH, meets International Organization for Standardization (ISO) 9001:2008 quality assurance standards.

• Rank: #9893 in BISS
• Brand: Climax Metal
• Number of items: 1

• Setscrew shaft collar for applications supporting low axial loads and simple positioning
• Corrosion-resistant design for applications involving harsh environments or frequent washdowns
• Stainless steel 316 for greater corrosion resistance than steel or stainless steel 303
• Includes a socket setscrew for securing the collar onto the shaft
• Operating temperatures range from -40 to 426 degrees C (-40 to 800 degrees F)

Ruland SP-4-A Two-Piece Clamping Shaft Collar, Aluminum, .250" Bore, 5/8" OD, 9/32" Width (Pack of 2)

Buy on the merchant's on-line looking and scan reviews. If you're trying to seek out Ruland SP-4-A Two-Piece Clamping Shaft Collar, Aluminum, .250" Bore, 5/8" OD, 9/32" Width (Pack of 2) with discount value. This is the simplest deals for you. Where you may notice these item is by on-line looking stores? Read the review on Ruland SP-4-A Two-Piece Clamping Shaft Collar, Aluminum, .250" Bore, 5/8" OD, 9/32" Width (Pack of 2) Now, it's special worth. So don't lose it.


Ruland SP-4-A Two-Piece Clamping Shaft Collar, Aluminum, .250" Bore, 5/8" OD, 9/32" Width (Pack of 2)
by Ruland
(2)

New!: $16.40 (as of 01/15/2013 04:33 PST)

Shaft Collars

This Ruland two-piece clamping shaft collar is made of aluminum. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-piece design separates into two halves, allowing installation or repositioning anywhere on the shaft without disturbing existing components. It accommodates a greater variety of shaft diameters than setscrew collars and is effective on both hard and soft shafts. It is made of aluminum for resistance to corrosion and tarnishing and is lightweight for use in applications where material weight is a consideration. This collar comes with forged socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range from -40 to 107 degrees C (-40 to 225 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Ruland manufactures shaft collars, rigid couplings, and zero-backlash motion control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The company, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) standards.

• Rank: #185717 in BISS
• Brand: Ruland
• Number of items: 2

• Two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars
• Effective on both hard and soft shafts
• Aluminum for resisting corrosion and tarnishing
• Includes forged socket-head cap screws for securing the collar onto the shaft
• Operating temperatures range from -40 to 107 degrees C (-40 to 225 degrees F)

Climax Metal H2C-012 Shaft Collar, Two Piece, Black Oxide Finish, Steel, 1/8" Bore, 13/16" OD, 1/4" Width, With 4-40 x 3/8 Set Screw

Buy on the merchant's online looking and read reviews. If you're making an attempt to find Climax Metal H2C-012 Shaft Collar, Two Piece, Black Oxide Finish, Steel, 1/8" Bore, 13/16" OD, 1/4" Width, With 4-40 x 3/8 Set Screw with the simplest deal. This is the simplest price for you. Where you'll notice these item is by online searching stores? Read the review on Climax Metal H2C-012 Shaft Collar, Two Piece, Black Oxide Finish, Steel, 1/8" Bore, 13/16" OD, 1/4" Width, With 4-40 x 3/8 Set Screw Now, it's special price. So do not lose it.


Climax Metal H2C-012 Shaft Collar, Two Piece, Black Oxide Finish, Steel, 1/8" Bore, 13/16" OD, 1/4" Width, With 4-40 x 3/8 Set Screw
by Climax Metal

New!: $5.86 (as of 01/14/2013 18:04 PST)

Shaft Collars

This Climax Metal two-piece clamping shaft collar has a recessed screw head and is made of black oxide steel. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-piece design separates into two halves, allowing installation or repositioning anywhere on the shaft without disturbing existing components. It accommodates a greater variety of shaft diameters than setscrew collars and is effective on both hard and soft shafts. This collar has a recessed screw head that provides an exterior profile free of major projections for increased safety. It is made of steel for weldability and rust resistance with a black oxide finish for a decorative appearance and resistance to white corrosion, chipping and flaking, and stick-slip of the screw during torqueing, improving the collar's grip on the shaft. Black oxide also provides mild corrosion resistance and improved lubricity. This collar comes with socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range from -17 to 148 degrees C (0 to 300 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Climax Metal Products Company (CLIMAX) manufactures shaft collars, rigid couplings, keyless locking devices, pulleys, keyless bushings, and bearings for the power transmission industry and industrial maintenance, repair, and operations (MRO) markets. The company, founded in 1946, and headquartered in Mentor, OH, meets International Organization for Standardization (ISO) 9001:2008 quality assurance standards.

• Rank: #110123 in BISS
• Brand: Climax Metal
• Number of items: 1

• Two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars
• Recessed screw head provides an exterior profile free of major projections for increased safety
• Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion
• Includes socket-head cap screws for securing the collar onto the shaft
• Operating temperatures range from -17 to 148 degrees C (0 to 300 degrees F)

Lovejoy SC2-26 Shaft Collar, Two Piece, Steel, 1-5/8" Bore, 2-5/8" OD, 11/16" Width, 5/16-24 x 1" Clamp Screw

Buy on the merchant's website shopping and browse reviews. If you're making an attempt to search out Lovejoy SC2-26 Shaft Collar, Two Piece, Steel, 1-5/8" Bore, 2-5/8" OD, 11/16" Width, 5/16-24 x 1" Clamp Screw with discount deals. This is the most effective deal for you. Where you'll notice these item is by online searching stores? Read the review on Lovejoy SC2-26 Shaft Collar, Two Piece, Steel, 1-5/8" Bore, 2-5/8" OD, 11/16" Width, 5/16-24 x 1" Clamp Screw Now, it's discount deal. So do not lose it.


Lovejoy SC2-26 Shaft Collar, Two Piece, Steel, 1-5/8" Bore, 2-5/8" OD, 11/16" Width, 5/16-24 x 1" Clamp Screw
by Lovejoy

New!: $19.07 (as of 01/14/2013 08:24 PST)

Shaft Collars

This Lovejoy two-piece clamping shaft collar is made of black oxide steel. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-piece design separates into two halves, allowing installation or repositioning anywhere on the shaft without disturbing existing components. It accommodates a greater variety of shaft diameters than setscrew collars and is effective on both hard and soft shafts. It is made of steel for weldability and rust resistance with a black oxide finish for a decorative appearance and resistance to white corrosion, chipping and flaking, and stick-slip of the screw during torqueing, improving the collar's grip on the shaft. Black oxide also provides mild corrosion resistance and improved lubricity. This collar comes with socket cup-point setscrews for securing the collar onto the shaft. The operating temperatures for this collar range from -17 to 148 degrees C (0 to 300 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Lovejoy manufactures flexible couplings and power transmission products that meet International Organization for Standardization (ISO) 9001:2000 quality assurance standards. Founded in 1900, Lovejoy is headquartered in Downers Grove, IL.

• Rank: #4480 in BISS
• Brand: Lovejoy
• Number of items: 1

• Two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars
• Effective on both hard and soft shafts
• Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion
• Includes socket cup-point setscrews for securing the collar onto the shaft
• Operating temperatures range from -17 to 148 degrees C (0 to 300 degrees F)

Climax Metal TC-037-24 Shaft Collar, One Piece, Threaded, Black Oxide Finish, Steel, 3/8" Bore, 1-1/16" OD, 5/16" Width, With 6-32 x 3/8 Set Screw

Buy on the merchant's online looking and scan reviews. If you're making an attempt to search out Climax Metal TC-037-24 Shaft Collar, One Piece, Threaded, Black Oxide Finish, Steel, 3/8" Bore, 1-1/16" OD, 5/16" Width, With 6-32 x 3/8 Set Screw with the simplest deal. This is the simplest deal for you. Where you could find these item is by on-line looking stores? Read the review on Climax Metal TC-037-24 Shaft Collar, One Piece, Threaded, Black Oxide Finish, Steel, 3/8" Bore, 1-1/16" OD, 5/16" Width, With 6-32 x 3/8 Set Screw Now, it's discount deal. Therefore don't lose it.


Climax Metal TC-037-24 Shaft Collar, One Piece, Threaded, Black Oxide Finish, Steel, 3/8" Bore, 1-1/16" OD, 5/16" Width, With 6-32 x 3/8 Set Screw
by Climax Metal
(1)

New!: $3.48 (as of 01/13/2013 22:11 PST)

Shaft Collars

This Climax Metal one-piece clamping shaft collar has a threaded bore and recessed screw head and is made of black oxide steel. It is a one-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars. It is easier to remove and reposition than setscrew collars and is effective on both hard and soft shafts. This collar has a threaded bore for installing on threaded shafts. Threaded collars create a positive mechanical stop against the shaft to support preloading of bearings and other components and to allow for higher axial loads and finer adjustments than smooth bore designs. This collar has a recessed screw head that provides an exterior profile free of major projections for increased safety. It is made of steel for weldability and rust resistance with a black oxide finish for a decorative appearance and resistance to white corrosion, chipping and flaking, and stick-slip of the screw during torqueing, improving the collar's grip on the shaft. Black oxide also provides mild corrosion resistance and improved lubricity. This collar comes with socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range from -17 to 148 degrees C (0 to 300 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.

Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, among others.

Climax Metal Products Company (CLIMAX) manufactures shaft collars, rigid couplings, keyless locking devices, pulleys, keyless bushings, and bearings for the power transmission industry and industrial maintenance, repair, and operations (MRO) markets. The company, founded in 1946, and headquartered in Mentor, OH, meets International Organization for Standardization (ISO) 9001:2008 quality assurance standards.

• Rank: #95415 in BISS
• Brand: Climax Metal
• Number of items: 1

• One-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars
• Threaded bore for fine adjustments, preloading of components, and higher axial loads than smooth bore designs; recessed screw head provides an exterior profile free of major projections for increased safety
• Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion
• Includes socket-head cap screws for securing the collar onto the shaft
• Operating temperatures range from -17 to 148 degrees C (0 to 300 degrees F)

Climax Metal C-100 Shaft Collar, Zinc Plated Steel, Set Screw Style, One Piece, 1" Bore, 1-1/2" OD, 5/8" Wide, With 5/16-18 Set Screw

Buy on the merchant's online shopping and browse reviews. If you're making an attempt to find Climax Metal C-100 Shaft Collar, Zinc Plated Steel, Set Screw Style, One Piece, 1" Bore, 1-1/2" OD, 5/8" Wide, With 5/16-18 Set Screw with discount price. This is the most effective price for you. Where you could realize these item is by online searching stores? Read the review on Climax Metal C-100 Shaft Collar, Zinc Plated Steel, Set Screw Style, One Piece, 1" Bore, 1-1/2" OD, 5/8" Wide, With 5/16-18 Set Screw Now, it's the simplest value. Thus do not lose it.


Climax Metal C-100 Shaft Collar, Zinc Plated Steel, Set Screw Style, One Piece, 1" Bore, 1-1/2" OD, 5/8" Wide, With 5/16-18 Set Screw
by Climax Metal

New!: $4.99 (as of 01/13/2013 12:05 PST)

Shaft Collars

Simply slide these collars onto a shaft and tighten the set screw to hold the collar in place. Collars are easy to adjust with their set screws. Made of carbon steel with a Black-Oxide finish to offer mild corrosion resistance. Our shaft collars are available in several different styles to meet you or your customer’s needs. Climax Metal Products Co. in business for over 60 years is the leading manufacturer of shaft collars, rigid couplings & keyless locking assemblies. Climax Metals, where fair market pricing and excellent customer service is our promise to you.

• Rank: #92041 in BISS
• Brand: Climax Metal
• Number of items: 1

• Effective on hard and soft shafts
• Cost effective collar design
• Easily installed where major disassembly would otherwise be required
• Tolerance: +.0005/+.0030
• Zinc plating provides moderate corrosion resistance